CADexe 2019 Design

A new version of CADexe 2019 Design is available. Before installing the new version, please uninstall your previous version using the Uninstall feature of your operating system.

  

  • Note: Release 2019 can read and write DWG files up to the latest version of this format (R2018). The same applies to DXF (Drawing eXchange Format) files, which store unencrypted drawing database contents.

  1. New Commands:

    • Layer commands:

      • Layer palette. Controls Layers and Layer properties with the Layers Manager palette.

      • Layer Dialog. Opens the legacy Layers Manager dialog box which was replaced by the Layers Manager palette (dialog box variant).

      • Layers Manager option: New Viewport Freeze. Lets you create a Layer initially frozen in all Viewports on layout Sheets.

      • MergeLayer. Merges one or more Layers to a destination Layer (dialog box variant).

      • -MergeLayer. Merges one or more Layers to a destination Layer (command window variant).

    • Roll View and Roll ViewCenter commands:

      • Roll View Continuous. Rotates the view in 3D space with continuous motion about a specified pivot point.

      • RollViewFree. Lets you view models interactively in 3D space without constraining the roll.

      • Roll View Horizontal. Swivels the model view left and right about an imaginary vertical axis.

      • Roll View Vertical. Tilts the model view to your model up and down about an imaginary horizontal axis.

      • Roll View Auto Target. Determines how the target point is detected for RollView commands.

    • Drawing Recovery commands:

      • Drawing Recovery. Displays the Drawing Recovery Manager palette to let you recover drawings after unexpected system failures.

      • Hide Drawing Recovery. Hides the Drawing Recovery Manager palette.

    • Authentication commands:

      • SignFile. Adds a digital signature to drawing files.

      • VerifySignature. Checks the digital signature of a drawing for authentication.

      • Remove Signature. Removes an existing digital signature from the drawing.

      • Mirror Hatch command. Determines whether hatches and gradient fills are reflected or retain their pattern direction when you apply Mirror and Flip commands.

    New Features:

    • Improved Preview Highlighting and Selection Highlighting. Entities are highlighted when you hover over them (preview highlighting) or when you select them (selection highlighting).

      • Cycling through entities during selections using Shift + Spacebar. Lets you selectively choose entities that are close to or on top of other entities.

      • Trimming of hatches. Trimmed Hatches maintain associativity with changed boundary entities, even if they are divided into different hatched areas. Divided Hatches remain as one entity, but you can use the EditHatch command to separate them into individual entities (dialog box option is Create Hatch for each boundary). The same applies to Gradients.

    Modified Features:

    • 3D Mouse support. The application detects if a 3D mouse is connected to the computer. The commands 3D Mouse Options, -3DMouseOptions, and 3D Mouse Buttons are obsolete and were removed.

    New System Variables:

    • LAYERDLGMODE. Determines whether the Layer command opens the Layers Manager palette or the legacy Layers Manager dialog box. By default the palette displays.

    • ISAVEBAK. Controls whether backup copies (files of type .bak) are created each time you save a drawing.

    • ISAVEPERCENT. Influences how often the application performs a full save. A full save takes longer than a partial save.

    • MIRRHATCH. Determines whether hatches and gradient fills are reflected or retain their pattern direction when you apply Mirror and Flip commands.

    • ORBITAUTOTARGET. Determines how the target point is detected for RollView commands.

    • PSOLHEIGHT. Sets the default height for the PolySolid command which lets you create a 3D solid in the shape of a polygonal wall.

    • PSOLWIDTH. Sets the default width for the PolySolid command which lets you create a 3D solid in the shape of a polygonal wall.

    • RECOVERYMODE. Determines whether drawing recovery information is recorded if the system terminates unexpectedly, such as from a power failure, hardware issue, or software problem.

    • SIGWARN. Controls whether the Digital Signature Verification dialog box appears each time you attach an external drawing with a valid digital signature as a Reference to the current drawing.

    Fixes:

  1. EXPORTEMF command: Visual quality of exported image data improved.(DESKTOP-9)

  2. EXPLODE command: Functionality added to select previously exploded block instances.(DESKTOP-43679)

  3. RECTANGLE command: New "3Point center" and "corner" options for rectangle creation implemented.(DESKTOP-59717)

  4. LOCKLAYER and UNLOCKLAYER commands: Multiple option added to select entities.(DESKTOP-57634)

  5. The creation of POLYGON in 3D (Z-coordinate) improved.(DESKTOP-51)

  6. Help description of SWEEP command improved.(DESKTOP-58507)

  7. SNAPANG system variable settings added to OPTIONS-dialog. SETSNAPANGLE command implemented to set snap and grid angles via command line.(DESKTOP-50111)

  8. Print Dialog: "Inverse" printing option improved.(DESKTOP-52411)

  9. The names of some SHX font files changed to make compatible with other CAD applications.(DESKTOP-52411)

  10. Functionality to select ESnap shortcuts in context menu improved.(DESKTOP-52922)

  11. PASTE command: Display of dimension texts on MS Excel sheets improved.(DESKTOP-66995)

CADexe 2019 Solid

A new version of CADexe 2019 Design is available. Before installing the new version, please uninstall your previous version using the Uninstall feature of your operating system.

  

  • Note: Release 2019 can read and write DWG files up to the latest version of this format (R2018). The same applies to DXF (Drawing eXchange Format) files, which store unencrypted drawing database contents.

  1. New Commands:

    • Layer commands:

      • Layer palette. Controls Layers and Layer properties with the Layers Manager palette.

      • Layer Dialog. Opens the legacy Layers Manager dialog box which was replaced by the Layers Manager palette (dialog box variant).

      • Layers Manager option: New Viewport Freeze. Lets you create a Layer initially frozen in all Viewports on layout Sheets.

      • MergeLayer. Merges one or more Layers to a destination Layer (dialog box variant).

      • -MergeLayer. Merges one or more Layers to a destination Layer (command window variant).

    • Roll View and Roll ViewCenter commands:

      • Roll View Continuous. Rotates the view in 3D space with continuous motion about a specified pivot point.

      • RollViewFree. Lets you view models interactively in 3D space without constraining the roll.

      • Roll View Horizontal. Swivels the model view left and right about an imaginary vertical axis.

      • Roll View Vertical. Tilts the model view to your model up and down about an imaginary horizontal axis.

      • Roll View Auto Target. Determines how the target point is detected for RollView commands.

    • Drawing Recovery commands:

      • Drawing Recovery. Displays the Drawing Recovery Manager palette to let you recover drawings after unexpected system failures.

      • Hide Drawing Recovery. Hides the Drawing Recovery Manager palette.

    • Authentication commands:

      • SignFile. Adds a digital signature to drawing files.

      • VerifySignature. Checks the digital signature of a drawing for authentication.

      • Remove Signature. Removes an existing digital signature from the drawing.

      • Mirror Hatch command. Determines whether hatches and gradient fills are reflected or retain their pattern direction when you apply Mirror and Flip commands.

    • 3D Modeling commands:

      • PolySolid. Draws 3D solid objects in the shape of polygonal walls.

      • PushPull. Modifies 3D solid objects or bounded areas by extrusion.

      • ChamferEdges. Bevels the edges of 3D solid objects. Includes Face and Loop options.

      • FilletEdges (updated). Rounds the edges of 3D solid objects. Includes Face, Chain, and Loop options.

      • Extrude (updated). Creates solid primitives by extruding closed 2D entities.

      • Includes Surface and Solid options to determine the type of model to create.

    New Features:

    • Improved Preview Highlighting and Selection Highlighting. Entities are highlighted when you hover over them (preview highlighting) or when you select them (selection highlighting).

      • Cycling through entities during selections using Shift + Spacebar. Lets you selectively choose entities that are close to or on top of other entities.

      • Trimming of hatches. Trimmed Hatches maintain associativity with changed boundary entities, even if they are divided into different hatched areas. Divided Hatches remain as one entity, but you can use the EditHatch command to separate them into individual entities (dialog box option is Create Hatch for each boundary). The same applies to Gradients.

    Modified Features:

    • 3D Mouse support. The application detects if a 3D mouse is connected to the computer. The commands 3D Mouse Options, -3DMouseOptions, and 3D Mouse Buttons are obsolete and were removed.

    New System Variables:

    • LAYERDLGMODE. Determines whether the Layer command opens the Layers Manager palette or the legacy Layers Manager dialog box. By default the palette displays.

    • ISAVEBAK. Controls whether backup copies (files of type .bak) are created each time you save a drawing.

    • ISAVEPERCENT. Influences how often the application performs a full save. A full save takes longer than a partial save.

    • MIRRHATCH. Determines whether hatches and gradient fills are reflected or retain their pattern direction when you apply Mirror and Flip commands.

    • ORBITAUTOTARGET. Determines how the target point is detected for RollView commands.

    • PSOLHEIGHT. Sets the default height for the PolySolid command which lets you create a 3D solid in the shape of a polygonal wall.

    • PSOLWIDTH. Sets the default width for the PolySolid command which lets you create a 3D solid in the shape of a polygonal wall.

    • RECOVERYMODE. Determines whether drawing recovery information is recorded if the system terminates unexpectedly, such as from a power failure, hardware issue, or software problem.

    • SIGWARN. Controls whether the Digital Signature Verification dialog box appears each time you attach an external drawing with a valid digital signature as a Reference to the current drawing.

    Fixes:

  1. EXPORTEMF command: Visual quality of exported image data improved.(DESKTOP-9)

  2. EXPLODE command: Functionality added to select previously exploded block instances.(DESKTOP-43679)

  3. RECTANGLE command: New "3Point center" and "corner" options for rectangle creation implemented.(DESKTOP-59717)

  4. LOCKLAYER and UNLOCKLAYER commands: Multiple option added to select entities.(DESKTOP-57634)

  5. The creation of POLYGON in 3D (Z-coordinate) improved.(DESKTOP-51)

  6. Help description of SWEEP command improved.(DESKTOP-58507)

  7. SNAPANG system variable settings added to OPTIONS-dialog. SETSNAPANGLE command implemented to set snap and grid angles via command line.(DESKTOP-50111)

  8. Print Dialog: "Inverse" printing option improved.(DESKTOP-52411)

  9. The names of some SHX font files changed to make compatible with other CAD applications.(DESKTOP-52411)

  10. Functionality to select ESnap shortcuts in context menu improved.(DESKTOP-52922)

  11. PASTE command: Display of dimension texts on MS Excel sheets improved.(DESKTOP-66995)

Download

CADEXE SOLID

CADEXE DESIGN

Contact

This site was designed with the
.com
website builder. Create your website today.
Start Now